835. Using On-Screen Menu[SIGNAL TYPE]Selection of RGB and component signals. Normally, this is set to [AUTO]. Please change the setting if the color of theimage remains unnatural.AUTO ��������������������� Automatically distinguishes RGB and component signals�RGB ����������������������� Switches to the RGB input�COMPONENT ��������� Switches to the component signal input�[VIDEO LEVEL]Selection of the video signal level when connecting an external device to the HDMI 1 IN terminal, HDMI 2 IN terminal,DisplayPort input terminal, and HDBaseT input terminal of the projector.AUTO ��������������������� The video level is switched automatically based on the information from the device outputting the signal�Depending on the connected device, this setting may not be made properly� In this case, switch to [NORMAL”or “ENHANCED” from the menu and view with the optimum setting�NORMAL���������������� This disables the enhanced mode�ENHANCED ������������ This improves the image’s contrast, expressing the dark and light sections more dynamically�SUPER WHITE ������� The video contrast is improved and the dark areas appear more dynamic�
