815. Using On-Screen MenuOptions FunctionNATIVE The projector displays the current image in its true resolution when the incoming computer signal has alower or higher resolution than the projector’s native resolution. (→ page 2)When the incoming computer signal has a higher resolution than the projector's native resolution, thecenter of an image will be displayed.LETTER BOX The image of a letterbox signal (16:9) is stretched equally in the horizontal and vertical directions to fit thescreen.WIDE SCREEN The image of a squeeze signal(16:9) is stretched left and right in 16:9.ZOOM The image of a squeeze signal (16:9) is stretched left and right in 4:3.Parts of the displayed image are cropped at the left and right edges and therefore not visible.FULL Project to full screen size.TIP:• Image position can be adjusted vertically using [POSITION] when the [16:9], [15:9], or [16:10] aspect ratios are selected.• The term “letterbox” refers to a more landscape-oriented image when compared to a 4:3 image, which is the standard aspectratio for a vide source.The letterbox signal has aspect ratios with the vista size “1.85:1” or cinema scope size “2.35:1” for movie film.• The term “squeeze” refers to the compressed image of which aspect ratio is converted from 16:9 to 4:3.[INPUT RESOLUTION]The resolution is assigned automatically when the resolution of the input signal from the computer video input terminalor BNC video input terminal (analog RGB) cannot be distinguished.
