NEC PH1202HL Installation Manual

Also see for PH1002HL: Reference manual

Contents

NEC PH1202HL Installation Manual Manual pdf 12 page image

ixImportant InformationHealth precautions to users viewing 3D imagesBefore viewing, be sure to read health care precautions that may be found in the user’s manual included with your3D eyeglasses or your 3D compatible content such as Blu-ray Discs, video games, computer’s video files and thelike.To avoid any adverse symptoms, heed the following:• Do not use 3D eyeglasses for viewing any material other than 3D images.• Allow a distance of 2 m/7 feet or greater between the screen and a user. Viewing 3D images from too close adistance can strain your eyes.• Avoid viewing 3D images for a prolonged period of time. Take a break of 15 minutes or longer after every hourof viewing.• If you or any member of your family has a history of light-sensitive seizures, consult a doctor before viewing 3Dimages.• While viewing 3D images, if you get sick such as nausea, dizziness, queasiness, headache, eyestrain, blurryvision, convulsions, and numbness, stop viewing them. If symptoms still persist, consult a doctor.• View 3D images from the front of the screen. Viewing from an angle may cause fatigue or eyestrain.Power management functionIn order to keep power consumption low, the following power management functions (1) and (2) have been set whenshipped from the factory. Please display the on-screen menu and change the settings (1) and (2) according to theaim of using the projector.1. STANDBY MODE (Factory preset: NORMAL)• When [NORMAL] is selected for [STANDBY MODE], the following terminals and functions will not work:HDMI OUT terminal, Ethernet/HDBaseT Port, USB Port, LAN functions, Mail Alert function(→ page 39)2. AUTO POWER OFF (Factory preset: 1 hour)• When [1:00] is selected for [AUTO POWER OFF], you can enable the projector to automatically turn off in 1hour if there is no signal received by any input or if no operation is performed.(→ page 51)Clearance for Installing the ProjectorAllow ample clearance between the projector and its surroundings.The high temperature exhaust coming out of the device may be sucked into the device again.Avoid installing the projector in a place where air movement from the HVAC is directed at the projector.Heated air from the HVAC can be taken in by the projector's intake vent. If this happens, the temperature inside theprojector will rise too high causing the over-temperature protector to automatically turn off the projectors power.• Before setting the projector in portrait orientation, please read page 2.