NEC PH1202HL Installation Manual

Also see for PH1002HL: Reference manual

Contents

NEC PH1202HL Installation Manual Manual pdf 4 page image

iImportant InformationSafety CautionsPrecautionsPlease read this manual carefully before using your NEC projector and keep the manual handy for future reference.CAUTIONTo turn off main power, be sure to remove the plug from power outlet.The power outlet socket should be installed as near to the equipment as possible, and should be easilyaccessible.CAUTIONTO PREVENT SHOCK, DO NOT OPEN THE CABINET.THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electricalshock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.This symbol alerts the user that important information concerning the operation and maintenance of thisunit has been provided.The information should be read carefully to avoid problems.WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGSCAN BE FULLY INSERTED.DOC Compliance Notice (for Canada only)This Class A digital apparatus meets all requirements of the Canadian ICES-003 Standards.Machine Noise Information Regulation - 3. GPSGV,The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.Disposing of your used productEU-wide legislation as implemented in each Member State requires that used electrical and electronic prod-ucts carrying the mark (left) must be disposed of separately from normal household waste. This includesprojectors and their electrical accessories. When you dispose of such products, please follow the guidanceof your local authority and/or ask the shop where you purchased the product.After collecting the used products, they are reused and recycled in a proper way. This effort will help usreduce the wastes as well as the negative impact to the human health and the environment at the minimumlevel.The mark on the electrical and electronic products only applies to the current European Union MemberStates.WARNINGThis is a Class A product. In a domestic environment this product may cause radio interference in which case theuser may be required to take adequate measures.CAUTION• In order to reduce any interference with radio and television reception use a signal cable with ferrite core attached.Use of signal cables without a ferrite core attached may cause interference with radio and television reception.• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environment. This equipment generates, uses, and can radi-ate radio frequency energy and, if not installed and used in accordance with the installation manual, may causeharmful interference to radio communications. Operation of this equipment in a residential area is likely to causeharmful interference in which case the user will be required to correct the interference at his own expense