323. Projector Adjustment and ConnectingAdjusting with the remote control1. Hold the CTL button and press the ECO/L-SHIFT button.The [LENS SHIFT] screen will be displayed.2. Press the ▼▲◀ or ▶ button.Use the ▼▲◀▶ buttons to move the projected image.TIP:• The figure below shows the lens shift ranges (projection mode: desktop/front) of lens units NP-9LS08ZM1, NP-9LS12ZM1, NP-9LS13ZM1, NP-9LS16ZM1, and NP-9LS20ZM1. For NP-9LS40ZM1 check page 7.100%V50%V 20%V 20%V20%V20%V50%V100%H11%H 11%H11%H11%HHeight of projected imageWidth of projected imageDescription of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected im-age).
