NEC PH1202HL Installation Manual
Also see for PH1002HL: Reference manual
                                                                                       | |
Contents
| 
393. Projector Adjustment and ConnectingHDMI INHDMI OUT HDMI IN3-5-2. Connecting an External MonitorAs shown in the figure, when the projector is connected to a computer, the same content from the HDMI input signalis displayed on the monitor for confirmation.• The HDMI OUT terminal cannot send analog signals (COMPUTER IN terminal, BNC terminal).NOTE:• When outputting HDMI signals, turn on the power of the video device on the output side and keep it connected before inputtingvideo signals into this device. The HDMI OUT terminals of the projector are equipped with repeater functions. When a device isconnected to the HDMI OUT terminal, the resolution of the output signal is limited by the resolution supported by the connecteddevice.• In the case of the HDMI OUT terminal of the projector, the theoretical number of units that can be connected in a series is seven.The maximum number of units that can be connected may be reduced by the external environment and quality of the signal andcable, etc. The number of units that can be connected may differ depending on the HDCP version, restriction on the number ofHDCP repeaters in the source device and the quality of the cable. The overall system needs to be checked in advance when build-ing a system.• When the [STANDBY MODE] is set to [NORMAL], video will not be output if the projector goes into the standby mode. Set themode to [HDBaseT STANDBY], turn on the power of the transmission device and keep it in a connected state.• When the [STANDBY MODE] of this device is set to [NORMAL], HDMI signals will not be output. To output HDMI signals, set the[STANDBY MODE] to [HDBaseT STANDBY], turn on the power supply of the transmission device and keep it connected.• HDMI repeater function will not be functioned if switching terminals and putting in/pulling out the HDMI cable is performed onthe 2nd projector and after.HDMI cable (not supplied) HDMI cable (not supplied) |
Related manuals for NEC PH1002HL
manualsdatabase
Your AI-powered manual search engine