NEC PlasmaSync 42VP4 (42Wide VGA) User Manual

Contents

NEC PlasmaSync 42VP4 (42Wide VGA) User Manual Manual pdf 29 page image

E-24Information When “AUTO PICTURE” is “OFF”IMAGE ADJUSTEXITASPECT MODEV-POSITIONH-POSITIONV-HEIGHTH-WIDTHAUTO PICTUREFINE PICTUREPICTURE ADJ.: FULL: OFFSEL. RETURNADJ.When Auto Picture is off, the Fine Picture and thePicture ADJ. items are displayed so that you can adjustthem. Adjusting the Auto PictureON ................... The Picture ADJ., Fine Picture andPosition adjustments are madeautomatically.Not available for digital ZOOM.OFF ................. The Picture ADJ., Fine Picture andPosition adjustments are mademanually.* If FINE PICTURE won’t be adjusted, set Auto Pictureto OFF and adjust manually. Adjusting the position of the imageV-POSITION ... Adjusts the vertical position of theimage.H-POSITION ... Adjusts the horizontal position of theimage.V-HEIGHT ....... Adjusts the vertical size of the image.(Except for STADIUM mode)H-WIDTH ......... Adjusts the horizontal size of theimage. (Except for STADIUM mode)FINE PICTURE* .. Adjusts for flickering.PICTURE ADJ.* ... Adjusts for striped patterns on theimage.* The Picture ADJ. and Fine Picture features are availableonly when the “Auto Picture” is off.* The AUTO PICTURE, FINE PICTURE and PICTUREADJ. are available only for RGB signals.But, these features are not available for moving pictureson VIDEO, HD/DVD or RGB. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults except for Auto Picture.Option1 Settings MenuSetting the on-screen menuThis sets the position of the menu, the display format(horizontal or vertical) etc.Example: Turning the DISPLAY OSM offPress the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “OPTION1”, thenpress the MENU/ENTER button. The “OPTION1”menu appears.2. Use the and buttons to select “OSM”, then pressthe MENU/ENTER button. The “OSM” menu appears.3. Use the and buttons to select “DISPLAY OSM”.4. To set the DISPLAY OSM to “OFF”...Use the and buttons to select “OFF”.The mode switches as follows each time the or button is pressed:ON ↔ OFFOSMEXITDISPLAY OSMOSM ADJ.OSM ANGLEOSM ORBITER: OFF: 1: H: OFFSEL. RETURNADJ.5. Once the setting is completed...Press the EXIT button to return to the OPTION1 menu.To return to the main menu, press the EXIT button oncemore.Information DISPLAY OSM settingsON ............ The on-screen menu appears.OFF .......... The on-screen menu does not appear.If you press the DISPLAY button on the remote controlfor more than 3 seconds the main menu will appearand can be set (although it is not ON). OSM ADJUST settingsAdjusts the position of the menu when it appears onthe screen.The position can be set between 1 to 6. OSM ANGLE settingsSets the display format (landscape “H” or portrait “V”).“H” OPTION1 1 / 3EXITOSMBNC INPUTD-SUB INPUTRGB SELECTHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: AUTO: 1080B: OFF: OFFSEL. RETURNMENU/ENTER OK3-87CONFIDENTIAL