NEC PlasmaSync 42VP4 (42Wide VGA) User Manual

Contents

NEC PlasmaSync 42VP4 (42Wide VGA) User Manual Manual pdf 42 page image

E-37Video Wall settingUse this feature to configure a 2×2 or 3×3 video wall.Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.Press the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “OPTION3”, thenpress the MENU/ENTER button.The “OPTION3” screen appears.2. Use the and buttons to select “VIDEO WALL”,then press the MENU/ENTER button.The “VIDEO WALL” screen appears.VIDEO WALLEXITDIVIDERPOSITIONDISP. MODEAUTO IDIMAGE ADJUSTP. ON DELAYPLE LINKREPEAT TIMER: 1: SPLIT: OFF: OFF: OFF: OFFSEL. RETURNADJ.3. Set the VIDEO WALL using and buttons.See page E-37 to set DIVIDER.See page E-37 to set POSITION.See page E-38 to set DISP. MODE.See page E-38 to set AUTO ID.See page E-38 to set IMAGINE ADJUST.See page E-39 to set P. ON DELAY.See page E-39 to set PLE LINK.See page E-40 to set REPEAT TIMER.4. Once the setting is completed...Press the EXIT button to return to the OPTION3 menu.5. Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Note: A contingency method of shutting off the electricpower should be used in cases of emergency during videowall setup.Information Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.DIVIDERSet the 2×2 or 3×3 video wall.Example: Setting “4”Perform Steps 1-2 of VIDEO WALL, then...3. Use the and buttons to select “DIVIDER”.4. Use the and buttons to select “4”.The mode switches as follows each time the or button is pressed:→ OFF ↔ 1 ↔ 4 ↔ 9 ←VIDEO WALLEXITDIVIDERPOSITIONDISP. MODEAUTO IDIMAGE ADJUSTP. ON DELAYPLE LINKREPEAT TIMER: 4: SPLIT: OFF: OFF: OFF: OFFSEL. RETURNADJ.Information DIVIDER settingsOFF, 1 ....... 1 Screen (Matrix display function does notwork)4 ................ 4 Screens (2×2 video wall)9 ................ 9 Screens (3×3 video wall)* When you select “4” or “9”, set the VIDEO WALLPOSITION.VIDEO WALL POSITIONSet the position of each display.Example: Setting “4”Perform Steps 1-2 of VIDEO WALL, then...3. Use the and buttons to select “POSITION”, thenpress the MENU/ENTER button.The “VIDEO WALL POSITION” screen appears.4. Use the and buttons to select “NO. 4”.The mode switches as follows each time the or button is pressed:• 4 Screens→ NO. 1 ↔ NO. 2 ↔ NO. 3 ↔ NO. 4 ←• 9 Screens→ NO. 7 ↔ NO. 8 ↔ ....... ↔ NO. 14 ↔ NO. 15 ←VIDEO WALL POSITIONPOSITION NO. 4EXIT RETURNADJ.5. Press the EXIT button to return to the VIDEO WALLscreen.Information VIDEO WALL POSITION settings1 Screen ..... There is no need to set POSITION.4 Screens9 ScreensNO. 1 NO. 2NO. 4 NO. 3NO. 7 NO. 8 NO. 9NO. 10 NO. 11 NO. 12NO. 13 NO. 14 NO. 153-100CONFIDENTIAL