NEC PlasmaSync 42VP4 (42Wide VGA) User Manual

Contents

NEC PlasmaSync 42VP4 (42Wide VGA) User Manual Manual pdf 33 page image

E-28Option2 Settings MenuSetting the power management for computerimagesThis energy-saving (power management) functionautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amount of time.Example: Turning the power management function onSet “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.Press the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “OPTION2”, thenpress the MENU/ENTER button.The “OPTION2” screen appears.2. Use the and buttons to select “PWR. MGT.”.3. To turn the power management function on ...Use the and buttons to select “ON”.The mode switches as follows each time the or button is pressed:ON ↔ OFFOPTION2 2 / 3EXITPREVIOUS PAGEPOWER MGT.CINEMA MODELONG LIFEGRAY LEVELNEXT PAGE: ON: ON: 3SEL. RETURNADJ.4. Once the setting is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information Power management function* The power management function automatically reducesthe monitor’s power consumption if the computer’skeyboard or mouse is not operated for a certain amountof time. This function can be used when using themonitor with a computer.* If the computer’s power is not turned on or if thecomputer and selector tuner are not properly connected,the system is set to the off state.* For instructions on using the computer’s powermanagement function, refer to the computer’s operatinginstructions. Power management settingsON ........ In this mode the power management functionis turned on.OFF ...... In this mode the power management functionis turned off. Power management function and POWER/STANDBY indicatorThe POWER/STANDBY indicator indicates the statusof the power management function. See page E-28 forindicator status and description. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.POWER/STANDBY indicatorPowermanagementmodeOnOffTurning the pictureback onPicture already on.Operate the keyboard ormouse. The picturereappears.POWER/STANDBYindicatorGreenRedPowermanagementoperating statusNot activated.Activated.DescriptionHorizontal and verticalsynchronizing signalsare present from thecomputer.Horizontal and/orvertical synchronizingsignals are not sentfrom the computer.Setting the picture to suit the movieThe film image is automatically discriminated andprojected in an image mode suited to the picture.[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]Example: Setting the “CINEMA MODE” to “OFF”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.Press the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “OPTION2”, thenpress the MENU/ENTER button.The “OPTION2” screen appears.2. Use the and buttons to select “CINEMA MODE”.3. To set the CINEMA MODE to “OFF” ...Use the and buttons to select “OFF”.The mode switches as follows each time the or button is pressed:ON ↔ OFFOPTION2 2 / 3EXITPREVIOUS PAGEPOWER MGT.CINEMA MODELONG LIFEGRAY LEVELNEXT PAGE: OFF: OFF: 3SEL. RETURNADJ.4. Once the setting is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information CINEMA MODEON ................... Automatic discrimination of theimage and projection in cinema mode.OFF ................... Cinema mode does not function. Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.3-91CONFIDENTIAL