NEC PlasmaSync 42VP4 (42Wide VGA) User Manual

Contents

NEC PlasmaSync 42VP4 (42Wide VGA) User Manual Manual pdf 39 page image

E-34PROGRAM TIMERThis sets the day and time at which the power will beswitched ON/OFF as well as the input mode.Example: Setting so that the power will be switchedon at 8:30 A.M., Monday, displaying RGB2 source,and switched off at 10:30 A.M.Perform Steps 1-2 of TIMER, then...3. Use the and buttons to select “PROGRAM”.TIMEREXITPRESENT TIMEPROGRAM : OFFSEL. RETURNADJ.4. Use the and buttons to select “ON”, then press theMENU/ENTER button.The “PROGRAM TIMER” screen appears.5. Adjust using the and buttons and ZOOM /button.PROGRAM TIMEREXITDATEMON——————SEL. RETURNADJ.ZOOMON08 : 30- - : - -- - : - -- - : - -- - : - -- - : - -- - : - -OFF10 : 30- - : - -- - : - -- - : - -- - : - -- - : - -- - : - -INPUTRGB2——————FUNCTIONINVERSE——————The mode switches as follows each time the ZOOM/ button is pressed:• Date→ — ↔ SUN ↔ MON ↔ ... ↔ SAT ↔ * ↔ *SUN ↔ *MON ↔ ... ↔ *SAT←• ON/OFF Hour→ 00 ↔ 01 ↔ 02 ↔ ..... ↔ 21 ↔ 22 ↔ 23←• Minute→ 00 ↔ 01 ↔ 02 ↔ ..... ↔ 57 ↔ 58 ↔ 59←• INPUT→ — ↔ LAST ↔ VIDEO1 ↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ←→ RGB3 ↔ RGB2 ↔ RGB1 ↔ HD/DVD2 ←• FUNCTION→ — ↔ ORBITER ↔ INVERSE ↔ WHITE ↔ WIPER←6. Once the setting is completed...Press the EXIT button.The programs are stored, and return to the TIMERscreen.Information PROGRAM TIMER settingsDATE ....................... Set the day of the week (e.g.Sunday).ON (hour, minutes) .... Set the time at which the powerwill be turned on in the 24-hourformat.OFF (hour, minutes) ... Set the time at which the powerwill be turned off in the 24-hourformat.INPUT ..................... Set the input mode that will bedisplayed when the timer is on.FUNCTION ............. Set the LONG LIFE function. To reset the programAlign the cursor with the DATE field that you wish toreset, then press the CLEAR button. To reset the dataAlign the cursor with the field (ON/OFF/INPUT/FUNCTION) that you wish to reset, then press theCLEAR button. Special characters in the PROGRAM TIMERscreenPROGRAM TIMEREXITDATEMONTUESAT*FRI—SAT*SEL. RETURNADJ.ZOOMON08 : 30- - : - -08 : 3008 : 30- - : - -08 : 3015 : 30OFF10 : 3018 : 1512 : 1510 : 00- - : - -12 : 1516 : 00INPUTRGB2—VIDEO1HD/DVD1—VIDEO1RGB1FUNCTIONINVERSE—WHITE——WHITE—• An asterisk “*” in the DATE fieldAn asterisk “*” means “every”. For example, “*FRI”means every Friday and “*” means everyday.• A hyphen “-” in the ON field or OFF fieldIf any hyphen remains in the ON field or OFF field, theFUNCTION can not be set.• A hyphen “-” in the FUNCTION fieldA hyphen “-” means last mode (the mode that was lastselected at the time the power was switched off).Setting the power on modeThis function sets the input mode at the time the power isswitched on.Example: Setting “VIDEO2”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.Press the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then ...1. Use the and buttons to select “OPTION3”, thenpress the MENU/ENTER button.The “OPTION3” screen appears.2. Use the and buttons to select “PWR. ON MODE”.3. To set the PWR. ON MODE to “VIDEO2”...Use the and buttons to select “VIDEO2”.The mode switches to LAST and any one of the sourcesshown in the table on page E-3 each time the or button is pressed.The available sources depend on the settings of “BNCINPUT” and “D-SUB INPUT”.3-97CONFIDENTIAL