NEC PlasmaSync 42VP4 User Manual

Also see for 42VP4A: Model information

Contents

NEC PlasmaSync 42VP4 User Manual Manual pdf 13 page image

6POWER/STANDBYApprox.7m/23ftUsing the wired remote control modeConnect the remote cable* to the remote control’s remotejack and the “REMOTE IN” terminal on the monitor.When the cable is connected, the mode automaticallyswitches to wired remote control. When the wired remotecontrol mode is used, the remote control can be operatedeven if no batteries are loaded.Operating Range* Use the remote control within a distance of about 7 m/23ft. from the front of the monitor’s remote control sensorand at horizontal and vertical angles of up to approximately30°.* The remote control operation may not function if themonitor’s remote control sensor is exposed to directsunlight or strong artificial light, or if there is an obstaclebetween the sensor and the remote control.Handling the remote control• Do not drop or mishandle the remote control.• Do not get the remote control wet. If the remote controlgets wet, wipe it dry immediately.• Avoid heat and humidity.• When not using the remote control for a long period,remove the batteries.• Do not use new and old batteries together, or use differenttypes together.• Do not take apart the batteries, heat them, or throw theminto a fire.• When using the remote control in the wireless condition,be sure to unplug the remote cable from the REMOTEIN terminal on the monitor.RGB2 / DVD2 / HD2 RGB 1R/VDG/ B/HD (IN / OUT) DV I ( Digital RGB )AUDIO 2R( MONO)LAUDIO 3R( MONO)LCr/Pr Y Cb/PbRGB 3External ControlIN OUTREMOTEExternal ControlIN OUTREMOTERemote ControlCable*To Remote Jack* The 1/8 Stereo Mini cable must be purchased separately.