NEC PlasmaSync 42VP4 User Manual

Also see for 42VP4A: Model information

Contents

NEC PlasmaSync 42VP4 User Manual Manual pdf 47 page image

40External ControlApplicationThese specifications cover the communications control ofthe plasma monitor by external equipment.ConnectionsConnections are made as described below.Connector on the plasma monitor side: EXTERNALCONTROL connector.Use a crossed (reverse) cable.Type of connector: D-Sub 9-pin male1 5962 3 47 8Pin NameNo ConnectionRXD (Receive data)TXD (Transmit data)DTR (DTE side ready)GNDDSR (DCE side ready)RTS (Ready to send)CTS (Clear to send)No connectionPin No.123456789Communication Parameters(1) Communication system Asynchronous(2) Interface RS-232C(3) Baud rate 9600 bps(4) Data length 8 bits(5) Parity Odd(6) Stop bit 1 bit(7) Communication code HexExternal Control Codes (Reference)FUNCTION CODE DATAPower ON 9FH 80H 60H 4EH 00H CDHOFF 9FH 80H 60H 4FH 00H CEHInput Switch Video1 (BNC) DFH 80H 60H 47H 01H 01H 08HVideo2 (RCA) DFH 80H 60H 47H 01H 02H 09HVideo3 (S-Video) DFH 80H 60H 47H 01H 03H 0AHDVD1/HD1 (RCA) DFH 80H 60H 47H 01H 05H 0CHDVD2/HD2 (BNC) DFH 80H 60H 47H 01H 06H 0DHRGB1 (mini D-sub 15-pin) DFH 80H 60H 47H 01H 07H 0EHRGB2 (5BNC) DFH 80H 60H 47H 01H 08H 0FHRGB3 (DVI) DFH 80H 60H 47H 01H 0CH 13HAudio Mute ON 9FH 80H 60H 3EH 00H BDHOFF 9FH 80H 60H 3FH 00H BEHPicture Mode NORMAL DFH 80H 60H OAH 01H 01H CBHTHEAT. 1 DFH 80H 60H OAH 01H 02H CCHTHEAT. 2 DFH 80H 60H OAH 01H 03H CDHDEFAULT DFH 80H 60H OAH 01H 04H CEHScreen Mode STADIUM DFH 80H 60H 51H 01H 02H 13HZOOM DFH 80H 60H 51H 01H 03H 14HNORMAL DFH 80H 60H 51H 01H 04H 15HFULL DFH 80H 60H 51H 01H 05H 16H14 : 9 DFH 80H 60H 51H 01H 09H 1AHAuto Picture ON DFH 80H 60H 7FH 03H 03H 09H 00H 4DHOFF DFH 80H 60H 7FH 03H 03H 09H 01H 4EHCinema Mode ON DFH 80H 60H C1H 01H 01H 82HOFF DFH 80H 60H C1H 01H 02H 83HNote: Contact your local dealer for a full list of theExternal Control Codes if needed.DisplayExternal equipmente.g., Personal computer