30Information Setting the timeWORKING TIME ..... Set the time duration for “SCREENWIPER”.When the WORKING TIME is setto “ON” the mode will stay on.WAITING TIME ...... Set the standby time until the“SCREEN WIPER” mode starts.SPEED ................ Set the moving speed for the“SCREEN WIPER”. The speeddecreases as the number increases.* The “WAITING TIME” can not be set when the“WORKING TIME” is ON.* THE “WORKING TIME” and “WAITING TIME” canbe set for up to 12 hours and 45 minutes in units of 3minutes.Setting the gray level for the sides of the screenUse this procedure to set the gray level for the parts on thescreen on which nothing is displayed when the screen isset to the 4:3 size.Example: Adjusting the “GRAY LEVEL”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.Press the MENU/ENTER button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the  and  buttons to select “OPTION2”, thenpress the MENU/ENTER button.The “OPTION2” screen appears.2. Use the  and  buttons to select “GRAY LEVEL”.3. To adjust the “GRAY LEVEL”...Use the  and  buttons to adjust the GRAY LEVEL.OPTION2 2 / 3EXITPREVIOUS PAGEPOWER MGT.CINEMA MODELONG LIFEGRAY LEVELNEXT PAGE: OFF: ON: 5SEL. RETURNADJ.4. Once the setting is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information GRAY LEVEL settingsThis adjusts the brightness of the black (the gray level)for the sides of the screen.The standard is 0 (black). The level can be adjustedfrom 0 to 15. The factory setting is 3 (dark gray). Restoring the factory default settingsSelect “ALL RESET” under the OPTION1 menu. Notethat this also restores other settings to the factorydefaults.

contents of the package

important information

recommandations importantes

How to Attach Options to the Plasma Monitor

Part Names and Function

Rear View / Terminal Board

Remote Control

Battery Installation and Replacement

Using the wired remote control mode

Installation

Connecting Your PC or Macintosh Computer

for 15 pin RGB (Analog)

Creating a video wall

Basic Operations

OFF TIMER

WIDE Operations

Wide Screen Operation with Computer Signals

Menu Operations

Picture Settings Menu

Reducing noise in the picture

Changing the Gamma Curve

Adjusting the colors

Setting the allocation of the audio connectors

Option1 Settings Menu

Setting the BNC connectors

Setting high definition images to the suitable screen size

Resetting to the default values

POWER/STANDBY indicator

Setting the gray level for the sides of the screen

Option3 Settings Menu

Setting the power on mode

Enabling/disabling the front panel controls

Loop Out setting

Video Wall setting

Advanced OSM Settings Menu

Color System Settings Menu

External Control

Table of Signals Supported

Troubleshooting

OSM Controls

limited warranty

NEC PlasmaSync 42VP4 User Manual

42VP4A

specifications

table of signals supported

42VP4DA

PlasmaSync 42VP4

PlasmaSync 42VP4D

PlasmaSync PX-42VP4A

PlasmaSync PX-42VP4DA

PX-42VP4D

PX-42VP4DP-A