NEC PlasmaSync 61XM1A User Manual

Also see for PlasmaSync 50MP2: User manual Brochure & specs

Contents

NEC PlasmaSync 61XM1A User Manual Manual pdf 14 page image

7Using the wired remote control modeConnect the supplied remote cable to the remote control’sremote jack and the “REMOTE CONTROL” terminal onthe monitor.When the cable is connected, the mode automaticallyswitches to wired remote control. When the wired remotecontrol mode is used, the remote control can be operatedeven if no batteries are loaded.Operating Range* Use the remote control within a distance of about 7 m/23ft. from the front of the monitor’s remote control sensorand at horizontal and vertical angles of up to approximately30°.* The remote control operation may not function if themonitor’s remote control sensor is exposed to directsunlight or strong artificial light, or if there is an obstaclebetween the sensor and the remote control.Handling the remote control• Do not drop or mishandle the remote control.• Do not get the remote control wet. If the remote controlgets wet, wipe it dry immediately.• Avoid heat and humidity.• When not using the remote control for a long period,remove the batteries.• Do not use new and old batteries together, or use differenttypes together.• Do not take apart the batteries, heat them, or throw theminto a fire.• When using the remote control in the wireless condition,be sure to unplug the remote cable from the REMOTECONTROL terminal on the monitor.EXTERNALCONTROLREMOTECONTROLCONTROLLOCKON / OFFSPEAKERS MUST HAVEMORE THAN 7WATT RATINGIMPEDANCE 6 OHMRIGHT LEFTAC INRGB 3(Digital RGB)RGB 1R/C R /P RL(MONO)VIDEO 1G / YHDVDRVIDEO 2VIDEO 3YC B /P BL(MONO)RL(MONO)RC R /P RB/C B /P BAUDIO 2 DVD1/HD1AUDIO 3 AUDIO 1RGB2/DVD2/HD2EXTERNALCONTROLREMOTECONTROLCONTROLLOCKON / OFFRemote ControlCableTo Remote JackPOWER/STANDBYPROCEEDINPUT SELECTDOWN UP LEFT/ - RIGHT/+ /EXITVOLUME30˚ 30˚Approx.7m/ 23ft