21Setting the color temperatureUse this procedure to set color tone produced by the plasmadisplay.Example: Setting “1”Press the PROCEED button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “PICTURE”, thenpress the PROCEED button.The “PICTURE” screen appears.2. Use the and buttons to select “COLOR TEMP.”.P I C T U R ECONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODECOLOR TEMP.NRMEMORY2OFF:::R GSEL. ADJ. RETURNEXIT3. Use the and buttons to select “1”.The mode switches as follows when the and buttons are pressed:→ 1↔ 2 ↔ 3 ↔ PRO ←* See page 22 to set “PRO”.COLOR TEMP. 1:* If neither the or button is pressed within 5 seconds,the current selection is set and the previous screen reappears.4. Once the setting is completed...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information Setting the color temperature1 ...................... High (bluer)2 ......................... Middle (Standard)3 ...................... Low (redder) Restoring the factory default settingsSelect “RESET” under the function menu. Note that thisalso restores other settings to the factory defaults.
