23Reducing noise in the pictureUse these settings if the picture has noise due to poorreception or when playing video tapes on which the picturequality is poor.Example: Setting “NR-3”Press the PROCEED button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “PICTURE”, thenpress the PROCEED button.The “PICTURE” screen appears.2. Use the and buttons to select “NR”.P I C T U R ECONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODECOLOR TEMP.NRMEMORY2OFF:::R GSEL. ADJ. RETURNEXIT3. Use the and buttons to select “NR-3”.The mode switches as follows when the and buttons are pressed:→ OFF ↔ NR-1 ↔ NR-2 ↔ NR-3 ←NR NR-3:* If neither the or button is pressed within 5 seconds,the current selection is set and the previous screenreappears.4. Once the setting is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information NR* “NR” stands for Noise Reduction.* This function reduces noise in the picture. Types of noise reductionThere are three types of noise reduction. Each has adifferent level of noise reduction.The effect becomes stronger as the number increases(in the order NR-1 → NR-2 → NR-3).OFF ............... Turns the noise reduction function off.
