15Watching computer images with awide screenSwitch to the wide screen mode to expand the 4 : 3 imageto fill the entire screen.1. Press the WIDE button on the remote control.2. Within 3 seconds ...Press the WIDE button again.The screen size switches as follows:→ NORMAL → FULLNORMAL size screen (4:3 or SXGA 5:4)The picture has the same size as the normal computerimage.FULL size screenThe image is expanded in the horizontal direction.When wide signals are input.FULL size screenWhen “PICTURE SIZE” is set to “OFF”The screen size switches as follows:→ TRUE → FULLTRUE size screen (VGA, SVGA 4:3)The image is true resolution.FULL size screenThe image is expanded in the horizontal and verticaldirection.When wide signals are input.TRUEThe image is true resolution.FULLInformation Supported resolutionSee page 52 for details on the display output of thevarious VESA signal standards supported by themonitor. “PICTURE SIZE” settingWhen the setting of “PICTURE SIZE” is OFF, the sizeof RGB-input pictures will be TRUE in place ofNORMAL. When 852 (848) dot 480 line wide VGA*signals with a vertical frequency of 60 Hz andhorizontal frequency of 31.7 (31.0) kHz are in-putSelect an appropriate setting for RGB SELECT modereferring to the“Table of Signals Supported” on page52.* “ IBM PC/AT” and “VGA” are registered trademarksof IBM, Inc. of the United States.
