NEC RT50X User Manual
                                                  | |
Contents
| 
E – 16PC CONTROLREMOTECONTROLMOUSEOUTPUTMOUSEOUTPUTSerial cable (supplied)Macintosh with USBPortIBM PS/2Operating Your Computer Mouse with the Remote ControlMouse adapter(For IBM PS/2)(supplied)Mouse adapter (USB)(supplied)The built-in remote mouse receiver enables you to operate your computer's mouse functions from the remotecontrol. It is a great convenience for clicking through your computer-generated presentations.To use the remote mouse function, connect the mouse output port of the rear projection display to your computer.To connect the mouse output port:1. Turn off your computer.2. For PCs:Remove your current mouse and connect the supplied serial cable from the mouse output to your PC's mouse port.(Use the 6- pinadapter for connecting to a PS/2 computer or the supplied USB adapter.)For Macintosh:Attach the supplied mouse adapter for USB to the mouse output port's serial cable and connect the rear projection display to yourUSB port of a Macintosh computer.NOTE: When the built-in remote mouse receiver is available, it will disable your regular mouse. To use your regular mouse again, disconnect the serial cable andrestart.NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or changeyour computer settings.When connecting using the USB terminal:For PC, the built-in mouse receiver can only be used with a Windows 98, Windows ME or Windows 2000 operating system.NOTE: Wait at least 5 seconds after disconnecting the mouse adapter before reconnecting it and vice versa. The computer may not identify the built-in mouse receiverif it is repeatedly connected and disconnected in rapid intervals. |
Related manuals for NEC RT50X
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine