NEC RT50X User Manual
                                                  | |
Contents
| 
E – 19Attaching the supplied chains to prevent against overturningTo prevent the rear projection display from overturning, be sure to install it on a level surface and fix it to a wall or pillar using the supplied chains.To attach the supplied chains to the wall or pillar:Be sure to use the two chains.1. Fix one end of the chain to the wall or pillar.NOTE: The chains, wall or pillar must withstand a force of 30 kg/66 lbs.2. Put the other end of the chain on a round screw hook of the rear panel. Do this for both round screw hooks.NOTE: Make sure that the chains are kept taut. Slack in the chains may cause the rear projection display to overturn resulting in injury.Use these two round screw hooks on the rear panel.Do's and Don'tsTake up slack in the chainsKeep chains straightWARNINGThe distance between the hook head and the wallshould be 250 mm/10 in. or less.250 mm/10"NOTE: Use commercially available M4 type round screw hooks ona wall or pillar.The hooks must withstand a force of 30 kg/66 lb. |
Related manuals for NEC RT50X
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine