NEC RT50X User Manual
                                                  | |
Contents
| 
E – 17AUTO ADJ.VOLUMEMENUE N TERCANCELOFFVIDEO S-VIDEO RGBONHELP ASPECTPOINTERMAGNIFYMUTESELECTPOWERPJAUTO ADJ.VOLUMEMENUENTERCANCELPJOFFVIDEO S-VIDEO RGBONHELP ASPECTPOINTERMAGNIFYMUTESELECTPOWERSwitching operation mode between computer and rear projection displayThe three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.In the Computer mode the PJ button is not lit.• When the POWER ON/OFF, MENU, POINTER, HELP, ASPECT or MAGNIFY button is pressed, the PJ button lights red to indicate that you arein the rear projection display mode, which allows the rear projection display menu operation using the three buttons.• If no buttons are pressed within 10 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the rearprojection display menu operation again, press the PJ button to light red.• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).Works as the Select button onthe rear projection display.Not litWorks as a mouse for yourcomputer.Works as a right-click button foryour computer.Works as a left-click button foryour computer.Lit redWorks as the Enter button onthe rear projection display.Works as the Cancel button onthe rear projection display.During Computer mode:During Computer mode by pressing the ENTER button for 1.5 sec-onds or more then releasing, the drag mode is set and the drag opera-tion can be performed simply by pressing the SELECT (▲, ▼, , )(mouse) button. To cancel the drag mode, press the ENTER (left click)button again or press the CANCEL (right click) button. |
Related manuals for NEC RT50X
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine