3.3.3 Mounting the 2BRIDB PCBSet the switches on the 2BRIDB-C1 PCB before mounting onto the 084M-B1/080E-B1/008E-B1/000E-B1 PCB, refer to the Switch Setting onpage 2-57.1. Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1/000E-B1 PCB.084M-B1080E-B1/008E-B1PlasticKnockoutPlasticKnockout000E-B1PlasticKnockoutsFigure 2-73 Plastic Knockouts on 084M-B1/080E-B1/008E-B1/000E-B12. Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to2BRIDB-C1 PCB.3. Mount the 2BRIDB-C1 PCB onto the 084M-B1/080E-B1/008E-B1/000E-B1 PCB using two Nylon-spacers and one screw. (Refer to Figure 2-74 Installing the 2BRIDB-C1 on page 2-51)SL1100 ISSUE 6.02-50 Installation
