082U-B11-4 5-8 1-2ESI SLI RL/AudioTrunksISDN PRI/T1/E1082U/008U/000U + 1PRIDBFigure 2-72 Connector of 1PRIDB-C13.4.8.1 ConnectorThe following table shows the pin-outs for the RJ-45 cable connector for PRI/T1/E1 connection.Table 2-21 RJ-45 PRI/T1/E1 Pin-Outs (J5)Pin No. Pin Function876543211 RA 12 RB 13 -4 TA 15 TB 16 -7 -8 -3.4.8.2 Switch SettingThe following figure shows the location of the switches on the IP7WW-1PRIDB-C1 board.1. Set the switches J6 to J9 according to the system, referring the Table 2-22 Switch Setting of1PRIDB-C1 on page 2-56.Table 2-22 Switch Setting of 1PRIDB-C1Switch No. Switch Position DescriptionJ6, J7 2M (default) Connect PRI/E1 (2.048 Mb/s) line1.5M Connect PRI/T1 (1.544 Mb/s) lineJ8, J9 T (default) T-Bus connectionS S-Bus connection2. Connect the cables from the NT1 Network Termination cable to the J5 connector on the 1PRIDB-C1 board.3. Assign whether the board works as PRI/T1/E1 by PRG10-51-01.With Normal operation, Status LED on the base board flashes (100 ms On/100 ms Off) green.SL2100 ISSUE 1.02-56 Installation
