2. Install three screws into the wall. The screw heads must stand off from the wall about 2.5 mm(0.098″) to 3.5 mm (0.138″).353.25 mm(13.907″)266.5 mm(10.492″)195.9 mm(7.713″)210 mm (8.268″)2.5 mm (0.098″) -3.5 mm (0.138″)Figure 2-10 Screw Positions• The screw diameter is 4 mm (0.158″) to 4.5 mm (0.177″).• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the Chassis.The other screw is installed after slide the chassis into the position.3. Align the three holes on the back of the Chassis with the three screws installed in the wall.HookScrew headScrew headFigure 2-11 Mounting the ChassisISSUE 1.0 SL2100Hardware Manual 2-9
