1. Assemble the FM/WM Base-F, Base-R and WM Support.WM Support FM/WM Base-RFM/WM Base-FFigure 2-39 Bases and Support of the Battery Box2. Refer to Figure 2-40 Floor-Mount Spacing Guide on page 2-30 for required spacing beforedrilling holes for 10 mm (0.394″) anchor bolts (locally procured).Mark and drill the four holes required to install the FM/WM Base.3. Using anchor bolts, secure the FM/WM Base to the floor.Four Anchor boltsM10 mm (0.394″)Front sideFront side: Maintenance spaceWall150 mm(5.906″)150 mm(5.906″)460 mm (18.110″)460 mm (18.110″)AC inletsideAC inletside500 mm (19.685″)190 mm(7.480″)Anchor bolt locationFigure 2-40 Floor-Mount Spacing GuideSL2100 ISSUE 1.02-30 Installation
