For instance, follow the procedure below to create logical disk 0 of the maximumcapacity in a 36GB HDD of RAID 5 (6+P). Creation of RANKSelect "1. RANK Bind" from the management software (NEC Storage Manager)menu and enter the following values to bind the RANK:Parameter Type = sRaid Type = 5Number of PD = 7Number of RANK = 1Rebuilding Time = 10 Creation of LDSelect "4. LD Bind" from the management software (NEC Storage Manager)menu and enter the following values to bind the logical disk:Parameter Type = sPDG No. = 0RANK No. = 0LD Capacity = 204520Number of LD = 1Format Time = 0Turning On the Cross Call FeatureTo enable both controllers to access all logical disks, it is necessary to turn on the crosscall feature.However, data corruption may occur if the transmission path feature is not provided byan additional software component such as NEC Storage PathManager. If so, it isrecommended to use the logical disks with the cross call feature set to OFF.Select "21. Cross Call" from the management software (NEC Storage Manager) menuto turn on the cross call setting. Refer to NEC Storage Manager user’s manual for moredetailed explanations on how to use the management software.Appendix A-5
