Replacing the LAN CardIf the LAN card is defected, the Service LED on the disk array unit lights orange. Inaddition, the Fault LED on the defected LAN card is lit orange (not flashing). Thedefected LAN card may be replaced with a new one without powering off the disk arrayunit.Follow the procedure below to replace the LAN card.1. Loosen the screw securing the LAN card.Figure 4-8 Releasing the Screw Securing the LAN Card2. Grasp the protrusions shown in the figure below and pull the defected LAN cardtoward you. Do not remove cables. Remove the LAN card with the cables beingconnected.Figure 4-9 Removing the LAN Card from the Unit3. Remove all the cables from the defected LAN card and connect them to thereplacement LAN card. Make sure to connect the cables to the same connectors ason the defected LAN card.4-8 Problem Solving
