NEC SuperScript 1800 User Manual

Also see for SuperScript 1800: Instructions Network user's guide Quick start

Contents

NEC SuperScript 1800 User Manual Manual pdf 77 page image

Printing Envelopes 71USING THE PRINTERPrinting Envelopes From the Printer Driver1. Format your envelopes in your computer application.2. Set your application to print width-wise on the envelopeand select the Multipurpose Tray (Tray 1) or optional 500-sheet 2nd Cassette (Tray 3) as your destination. Youcannot print envelopes from the standard 500-sheetCassette (Tray 2).note: You cannot print 15mm from the left edge of theenvelope. Nor can you print 10mm from the top, bottomor right edge.From Windows 95/98 —open the print Properties dialogbox and select Landscape in the Paper tab. Then selectTray 1 or 3 from the Paper Source option in the Paper tab.From Windows NT —open the print Properties dialogbox and select Landscape in the Paper tab. Select theAdvanced tab and select Tray 1 or 3 from the PaperSource options.From Windows 3.X —open the Printer Setup dialog boxand select Landscape in the Orientation option. SelectTray 1 or 3 from the Paper source options. Click OK toclose the Setup dialog box. Choose the Print commandfrom the File menu and click OK.From the Macintosh OS —choose Page Setup from thefile menu, select the Landscape orientation icon, andclick OK. Select Print from the File menu, choose Tray 1(Manual), Tray 1 or Tray 3 from the Paper source pop-upmenu, and click Print. If you select Tray 1 (Manual) as thepaper source, you will be alerted to insert an envelopeeach time you print.note: Choose Thick Paper in the printer driver or on theOperator Panel if the envelope is made of paper above24lb.Printing Envelopes Manually From theOperator PanelFollow the directions below to print envelopes manuallyfrom the Multipurpose Tray.1. From the default Ready state Press the Go/Continuebutton to take the printer offline.2. Press the Menu button until the message PRINTINGMENU appears on the display.3. Press the Item button until SOURCE AUTO* appears onthe display.4. Press the Value + button until the message SOURCETRAY 1-M appears on the display.5. Press the Select/Cancel button. An asterisk appears afterthe selection: SOURCE TRAY 1-M*.6. Press the Item button until the message PAPER LETTER*appears.7. Press the Value+ button until the message PAPER COM10 (or chosen envelope size) appears.8. Press the Select/Cancel button. An asterisk appears afterthe selection: PAPER COM 10*9. Press the Go/Continue button to bring the printer backonline.10. Feed the envelopes in the Multipurpose Tray one at atime. Press the Go/Continue button for every envelope.