2 - 90 Chapter 2Chapter 2 - Blade Installation and Startup8. If there are any existing files on the USB flash drive, you must delete or move any files off the bladebefore proceeding.9. Open the directory containing the system software files to be used for the system update.10. Select all the files within the folder and copy them to the USB flash drive.This can be done as follows:- From the software directory window, click: Edit - Select All - Edit - Copy- From the USB flash drive window, click Edit - Paste● The files are then copied from the PC to the USB flash drive.2.9.8 Upgrading Your SoftwareFigure 2-40: CCPU BLADEAs a precaution, it is recommended that the customer database besaved prior to updating the system software. Refer to Backing Up/Restoring a Database (page 2-88).Gbit EthernetFast Ethernet CN7Status LED1Status LED2Status LED3Status LED4Status LED5CN6BGM/EXSPControl CN10BGM/EXSPControl CN8BGM/EXSPControl CN9SW1USB CN5VOIPDBMEMDBCN3CN1BatteryCN4CN2SW6
