4 - 10 Chapter 4Chapter 4 - Terminals and Optional Equipment3. Following the directions below for the type of dial pad installed.4. Save to memory by pressing line key 2, 8, 14, or 20. The display changes back to the Service Class R/Wmode and the MW LED will be lit red.5. Press Exit to return the terminal to idle condition.4.3.4 Programming the IP Terminal for the Dial Pad and Line Key Kit1. Enter the terminal’s program mode by pressing HOLD CONF * #.2. At the log-in screen, enter the user name (default: ADMIN) and password (default: 6633222) and pressthe OK Soft Key.3. Press Soft Key 3 for “Maintenance Setting”.4. Press Soft Key 4 for “Adjust”.5. Press Soft Key 2 for “Key Kit Type”.Dial Pad Type Push LED IndicationJapanese 0 1 Line 1 LED on RedModel A Terminal 0 2 Line 2 LED on RedModel B UX5000 Terminal 0 3 Line 1 and 2 LEDon RedCall Center 0 4 Line 1 LED onGreenHotel-1 0 5 Line 2 LED onGreenHotel-2 0 6 Line 1 and 2 LEDon GreenRetirement Home 0 7 Line 1 LED flashingRedJapan 32-Button 0 8 Line 2 LED flashingRedJapan Value 0 9 Line 1 and 2 LEDflashing RedModel A Value 1 0 Line 1 LED flashingGreenModel B Value 1 1 Line 2 LED flashingGreenReserve 1 2 Line 1 and 2flashing Green
