4 - 20 Chapter 4Chapter 4 - Terminals and Optional Equipment4.5.1 To program a DSS Console . . .With the default settings, there are no DSS Consoles assigned.1. 10-03-01 : Blade SetupThe system automatically assigns the terminal type (10) for the port which has a DSS console installed.When installing a DSS, the system must auto-detect the console in order for the LEDS to functioncorrectly. When connecting the DSS to a extension previously defined with another circuit type, undefinethe circuit type (enter 00 in Program 10-03 for the extension number), then connect the DSS Console.2. 15-05-22 : IP Phone Terminal Basic Data Setup - DSS Console AssignmentWhen an IP terminal is to use a DSS Console, assign the console number (01-32) using this option. Thisprogram must also be used to delete the association between an IP terminal and a console. Refer toProgram 30-02 when associating with a digital keyset.3. 30-02-01 : DSS Console Extension AssignmentDesignate the digital extensions that have DSS Consoles connected to them.4. 30-03-01 : DSS Console Key AssignmentCustomize the functions of the DSS Console keys.5. 30-04-01 : Alternate DSS Console Key AssignmentIf the console should have Alternate Answering, use this program to assign the Alternate AnsweringDestination.
