UNIVERGE SV8100 Issue 7.0Night Service 2 - 991Night ServiceDescriptionNight Service lets system users activate one of the Night Service modes. Night Service redirects calls totheir night mode destination, as determined by Assigned and Universal Night Answer programming. Auser typically activates Night Service after normal working hours, when most employees are unavailableto answer calls. There are eight Service Modes. At default, the mode names are assigned as follows: Mode 1 = No setting Mode 2 = Night Mode 3 = Midnight Mode 4 = Rest Mode 5 = Day2 Mode 6 = Night2 Mode 7 = Midnight2 Mode 8 = Rest2There are 32 Service Patterns/Groups available.Assigned Night Answer (ANA)With Assigned Night Answer (ANA), Night Service has calls ring extensions directly. Assigned NightAnswer provides an answering point for Night Service calls. For certain applications, this may be moreappropriate than Universal Night Answer. For example, you could program trunks to ring the securitystation telephone during off hours.For more information on assigning trunks to ring extensions, refer to Direct Inward Line (DIL) on page2-435.Universal Night Answer (UNA)Universal Night Answer makes incoming calls ring over the External Paging speakers. With UNA, anemployee can go to a telephone and press the flashing line key or use Universal Answer to pick up thecall. Only ring groups calls can be used with Universal Night Answer. For more on setting up UniversalAnswer, refer to Central Office Calls, Answering on page 2-249.
