UNIVERGE SV8100 Issue 7.0Code Restriction Override 2 - 311Code Restriction OverrideDescriptionCode Restriction Override lets a user temporarily bypass the Code Restriction for an extension. Thishelps a user that must place an important call that Code Restriction normally prevents. For example, youcould set up Code Restriction to block 900 calls and then provide a Code Restriction Override code toyour attendant and executives. When the attendant or executive needs to place a 900 call, they just: Press Speaker, dial a service code, and enter their override code. Press Speaker and dial a trunk access code (e.g., 9 or #9 002). Place the 900 call without restriction.You can assign a different Code Restriction Override code to each extension. Or, extensions can sharethe same override code.Code Restriction Override bypasses all Code Restriction programming. Walking Code Restriction allowsyou to assign a Code Restriction level for each user. When a call is placed using Walking CodeRestriction, the restriction for the call is based on the Code Restriction level defined in Programs21-05-xx and Programs 21-06-xx.Conditions Off-Premise notification and external extensions require access to outside lines. In the Class heading in the SMDR report, POTA indicates that the call was placed usingTemporary Code Restriction Override. Code Restriction Override and Walking Code Restriction temporarily overrides anextension Code Restriction. If the system has VRS, users hear, “Your call cannot go through. Please call the operator”when they dial a number that Code Restriction prevents.Default SettingDisabledRelated FeaturesCentral Office Calls, Placing
