UNIVERGE SV8100 Issue 13.0Cordless Telephone Connection 2 - 377Cordless Telephone ConnectionDescriptionUsing an AP(R)-R/AP(A)-R Unit for DTH/DTR telephones or an APR-L for DTL telephones a cordlesstelephone (2500-type) can be connected to a multiline terminal.The CD-4LCA with PZ-4LCA Daughter Board, CD-8LCA with PZ-8LCE Daughter Board and theSLTII(1)-U( ) ADP also support cordless telephones, but this feature refers to multiline terminal cordlessconnection.Conditions A voice announced internal call to the multiline terminal does not ring the cordlesstelephone. Only one cordless single line telephone can be connected to an APR-L, AP(R)-R, orAP(A)-R Unit. When CO Prime Line is assigned to the associated multiline terminal, internal dial tonecannot be transferred to the cordless telephone. The cordless telephone requires a PBR circuit while dialing. When all PBR circuits arebusy, a busy tone is heard when the phone goes off-hook. Depending on your environment, the maximum number of cordless devices used withoutinterference varies. This feature works with 2500-type cordless single line telephones. The multiline terminal user and the associated cordless telephone user cannot talk to eachother. An APR-L, AP(A)-R or AP(R)-R Unit with hookflash enabled follows the same operatingprocedures as a single line terminal connected to a CD-4LCA with PZ-4LCA Daughter Boardor CD-8LCA with PZ-8LCE Daughter Board. The multiline terminal LCD displays normal information for multiline terminal when acordless terminal is used. When the multiline terminal user goes off-hook before the cordless single line telephoneuser, a PBR circuit is not connected for the cordless single line telephone. The cordless telephone must be installed within 10 feet of the AP(R)-R, AP(A)-R Unit orAPR-L Unit.
