NEC Univerge SV9300 Series User Manual

Also see for Univerge SV9300: User guide Programming guide User guide User guide Networking manual

Contents

NEC Univerge SV9300 Series User Manual Manual pdf 75 page image

CALL PICKUP - DIRECTThis feature permits a terminal user to pickup a callto any other terminal in the system.This feature is set by system data setting atinitial installation. For details, please contactthe system administrator.The feature key is set by system data settingat initial installation. For details, pleasecontact the system administrator.1. Press Speaker key.Speaker key lamp lights red. →Line key lamp lights green. →2004:26 PM MON 11 MAY 2015Recall PICK >>>>2. Press Call Pickup - Direct featurekey.4:26 PM MON 11 MAY 2015Recall PICK >>>>3. Dial the extension number of ringingterminal.PICK UP 210 2014:26 PM MON 11 MAY 2015MIC Mute4. Start conversation with calling party.MULTILINE APPEARANCEThis feature allows you to accommodate the lines(another terminal number) other than My Line onthe Programmable line/feature keys. Whenaccommodating another terminal number on theProgrammable line/feature key, the user cananswer the call routed to another by pressing thekey that is assigned.The feature key is set by system data settingat initial installation. For details, pleasecontact the system administrator.TO ANSWER A CALL1. A call is terminated to the terminalwhose terminal number isaccommodated to the MultilineAppearance feature key.Call Indicator Lamp flashes.Multiline key lamp flashes red. →2. Press Multiline Appearance featurekey.Call Indicator Lamp goes off.Speaker key lamp lights red. →Multiline key lamp lights green. →3. Lift the handset to start aconversation.Speaker key lamp goes off. →2014:26 PM MON 11 MAY 2015MIC MuteWhen you press a feature key with a call inprogress, the call will be disconnected.FEATURE OPERATION67