NEC Univerge SV9300 Series User Manual

Also see for Univerge SV9300: User guide Programming guide User guide User guide Networking manual

Contents

NEC Univerge SV9300 Series User Manual Manual pdf 95 page image

WHISPER PAGEThis feature allows a secretary to interrupt the bossin a private way. By pressing a feature key ordialing an access code, the secretary terminal caninterrupt the conversation between the boss andanother party. When the conversation isinterrupted, the boss can hear the secretary but theother party is unaware of the voice override.The feature access code/feature key is set bysystem data setting at initial installation. Fordetails, please contact the systemadministrator.TO SETWhisper Page has two kinds of operations.PATTERN 11. Press Speaker key.You will receive a dial tone.Speaker key lamp lights red. →2. Dial desired extension number.You will receive a busy tone.BUSY 2014:26 PM MON 11 MAY 2015CB CW >>>>3. Press Transfer key.4:26 PM MON 11 MAY 2015CB CW >>>>4. Dial Whisper Page access code orpress Whisper Page feature key.You will receive a service set tone.2014:26 PM MON 11 MAY 2015Recall VOICE CB >>>>5. Listen to conversation and speak toboss terminal only.CALL WAITING 2014:26 PM MON 11 MAY 2015MIC CONF RecallPATTERN 21. Press Speaker key.You will receive a dial tone.Speaker key lamp lights red. →2. Dial Whisper Page access code orpress Whisper Page feature key.You will receive a feature dial tone.4:26 PM MON 11 MAY 2015CB CW >>>>3. Dial desired extension number.You will receive a service set tone.2014:26 PM MON 11 MAY 2015Recall VOICE CB >>>>4. Listen to conversation and speak tocalled terminal only.CALL WAITING 2014:26 PM MON 11 MAY 2015MIC CONF RecallTO ANSWER1. Press Answer key.Call in progress is placed on hold.A hold tone is not transmitted to the otherparty of the original call.Calling terminal and called terminal canprivately speak.Answer key lamp lights red. →CW 2014:26 PM MON 11 MAY 2015MIC MuteFEATURE OPERATION87