Setup and Operation 2-21Table 2-6 Setup ParametersParameterDefaultSettingAlternateSettingsMiscellaneousLow battery beepWake Up AlarmHourMinuteEnabled(checked)DisabledDisabled (unchecked)One Time, Every DayUser inputUser inputL2 Cache Enabled(checked)Disabled (unchecked)ExitSave and Exit To save thecurrent setupparameters (withchanges) and exitsetup.Save and Reboot To save the currentsetup parameters, thenreboot the computer.Exit (No Save) To exit Setup withoutsaving any parametersetting changes.Default Settings To restore the defaultSetup settings, thenExit.Version Info Displaysinformation aboutSetup and BIOS.As a new user, it is important to check and perhaps change the following parameter set-tings.Startup Menu Date and TimeSet the System Date and Time to the current date and time. Use numerical input(remember that the hour setting begins at 0 and ends at 23). The settings remain inmemory even after you turn off system power. Boot DeviceSelect the drive you want your system to read from when the computer starts up.Specify the boot sequence, by instructing the system to look only to the Hard Disk, drive C first to the Diskette, drive A, and then to drive C.
