3-10 Using Setup Video TimeoutAllows you to select the amount of time before your video shuts downwhen Power Management is set to Custom. Peripheral TimeoutIf this feature is On, onboard serial, parallel, diskette or SuperDiskLS-120 devices are power managed after 2 seconds of inactivity. Audio Device TimeoutIf this feature is On, the audio device turns off when no sound device ac-tivity occurs for 30 seconds. Standby TimeoutYou can specify when the system enters Standby mode after total systeminactivity. Auto Suspend TimeoutYou can select the system suspend timeout period. If no system activityhas occurred for the specified timeout, the system will enter the selectedSuspend Option. Suspend OptionSuspend mode is the default power management mode. When you selectSuspend, after a specified amount of inactivity, your NEC Versa shutsdown all devices as specified by the user in Setup (or applies defaulttimeouts). All your data is automatically recovered from where you leftoff when you Resume. Auto Save to File (STF)The system enters STF after 30 minutes in Suspend mode. Panel BacklightLets you choose the backlight intensity. Suspend Warning ToneThis parameter lets you enable or disable a warning tone when Suspendmode starts. It is best to keep this option On. Modem Ring ResumeLets you choose whether the system resumes automatically when the ex-ternal serial port modem receives a transmission.
