2-4 Docking/Undocking the NEC VersaOnce you connect the power cable to the docking station,keep it plugged in and the power turned on. That way, thedocking station is always ready for the docking procedure.Preparing the NEC Versa for DockingFollow the procedure given next to prepare the NEC Versafor docking.1. Set NEC Versa power for your system as follows.n If you have a Plug and Play NEC Versa, put yoursystem into Suspend mode or turn off power beforedocking.For example, the NEC Versa 4000 with Windows 95running is a Plug and Play system.n If you have a non-Plug and Play system, turn offsystem power before docking.Non-Plug and Play systems include the UltraLiteVersa, NEC Versa E, NEC Versa M, NEC Versa P,or NEC Versa V.Make sure your system is in Suspend modeor powered off as appropriate before docking. If theNEC Versa is in Active mode or power is on duringdocking, the docking station ejects the computer.2. If you are running the NEC Versa on AC power, dis-connect the AC adapter cable from the NEC Versa.Before disconnecting power, save any openfiles or close open applications to avoid data loss.
