Docking/Undocking the NEC Versa 2-11UNDOCKING THE NEC VERSANEC recommends that you power down your NEC Versabefore undocking.n For standard undocking procedures, follow the instruc-tions in “Normal Undocking.”n If power to the docking station is interrupted unexpect-edly, follow the instructions in “Emergency Undocking.”You may need this procedure in case of a power failureor motor jam.Normal UndockingUndock your NEC Versa as follows.1. Check the status of your NEC Versa power:n If you have an NEC Versa 4000 with Windows 95,put your system into Suspend mode or turn off sys-tem power before undocking.n If you have an UltraLite Versa, NEC Versa E, NECVersa M, NEC Versa P, or NEC Versa V, turn com-puter power off before undocking.To power off the NEC Versa, press the power button onthe front panel of the docking station.2. For easier undocking, close the LCD panel.(This is notrequired, but is recommended.) If using software un-docking, do not close the panel.
