Setting Up and Using the Software 3-7Docking Station 4000 Setup SoftwareThis section describes how to use the software that theDocking Station 4000 Setup utility loads in your NECVersa.n At start up, the NEC Versa lets you choose a configura-tion to use. See “Choosing a Configuration” for infor-mation.n NEC Versa M users can use either the Docking Sta-tion 4000 sound system or the NEC Versa sound sys-tem. See “Using the Audio Switcher Utility” for moreinformation.n Some programs run from MS-DOS instead of Windows.Use the information under “Using DOS-BasedPrograms” to enable and control Docking Station 4000sound from MS-DOS applications.Choosing a ConfigurationAfter setting up the Docking Station 4000 software, yourNEC Versa boot-up differs from its original procedure. Thenew boot up sequence lets you choose which configurationto use.Use the new boot up procedure as follows:1. Power on your NEC Versa as you would normally. Amenu similar to the following is displayed.1. Docking Station 4000 Configuration2. Mobile Configuration3. Docked Configuration
