Using the Hardware 4-378. Reassemble the system as follows:! Lift up the keyboard and align the tabs on the front of it with thesystem grooves in the system.! Reseat the keyboard in its original position.! Slide the keyboard retainers back onto the system.Reassembling the systemSwitch Settings: six-position dip switchA six- or four-position dip switch is located underneath the keyboard. Thefollowing list identifies each switch setting and its function.! Switch 1, Password Override Switch — The default setting is “OFF.”If you forget your password and cannot access the data on your NECVersa, change the setting to “ON” and your current password iserased.! Switch 2 — Keyboard select; Default is “ON” for U.S. 85 keykeyboard.! Switch 3 — Reserved for factory use; Default is “ON.”! Switch 4 — Keyboard select; Default is “ON” for U.S. 85 keykeyboard.
