3-28 Using the SoftwareHDPREPEZ UtilityUsing the HDPREPEZ utility automatically configures your NECVersa’s system’s save-to-file (STF) area on the hard disk drive.Note: For more details about the HDPREPEZutility, see the HDPREPEZ.TXT file in theNECUTILS/HDPREP directory.Using HDPREPEZ in Windows 98 or 95In Windows 98 or 95, run the HDPREPEZ utility if you increase thememory capacity in your NEC Versa beyond the factory installed basememory.Follow these steps to run the HDPREPEZ utility.1. Power off and restart your NEC Versa.2. At the statement “Starting Windows 98 (or 95),” press F8.3. From the Startup menu, select the “Safe Mode Command PromptOnly” option.4. Enter MS-DOS. At the c: prompt, type cd \necutils\hdprep andpress Enter to change to the \necutils\hdprep directory.5. Type HDPREPEZ and press Enter. The utility automaticallyprepares your NEC Versa for the newly installed memory.6. Power off your system and then power on. A file, large enough toaccommodate your system’s memory is created on the hard diskdrive.
