Using External Devices 5-9Note: The default TV Out setting is for NTSCtransmission. The U.S. and Japan use the defaultNTSC signal; Hong Kong and most Europeancountries use the PAL signal. If you require the PALsetting, use the Advanced CMOS Setup section ofthe BIOS setup utility to change the setting.The NEC Versa does not support the SECAMsignals used in some countries.External Audio OptionsThe NEC Versa comes equipped with built-in audio ports that let yourecord and play sound.Connect audio jacks, like a microphone, headphones, or externalspeakers to the audio ports as follows.1. Locate the audio port that you want to use.2. Plug the jack into the appropriate port on the right side of the NECVersa.Audio portsA – Volume Control B – Headphones C – Line In D – External Microphone
