5-4 Using External DevicesConnecting a parallel printer5. Connect the power cable to the device and a properly grounded walloutlet.6. Turn on power to the system and the device.Note: Check that the device is online beforeyou try to use it. See the instructions that came withthe device for more information.Serial DevicesTo install a serial device such as a printer or an external modem, youneed a cable with a female 9-pin connector.Note: When you connect a printer or modem,be sure to install the appropriate driver through theWindows Control Panel.Follow these steps to connect a serial device to your NEC Versa.1. Check that power to both the NEC Versa and the device is off.2. Open the left-most port cover on the back of the system and locatethe serial port.
