Introducing Your NEC Versa 1-7Power ButtonThe Power button is a “smart” switch, meaning that it recognizes when the system is inSuspend mode in Windows 95*, or in Standby mode in Windows 98**. If in Suspendor Standby mode, you cannot power off until you press the Power button to resumeoperation.* The BIOS parameter “System Switch” must be set to “Sleep.”** The Advanced Power Management setting, “When I press the power button onmy computer,” must be set to Standby.Put the unit in Suspend or Standby mode when you need to be away from your systemfor a short period of time and want to return to where you left off. Suspend mode inWindows 95 and Standby mode in Windows 98 shuts down all devices in the systemwhile retaining data and system status.! In Windows 95, press the Power button for less than 4 seconds to put your systeminto Suspend mode. The BIOS parameter “System Switch” must be set to “Sleep.”! In Windows 98, go to Start, Shutdown, Standby to put your system into Standbymode.! Use the Power button in the following ways:— Press the Power button to power on.— Press the Power button to resume from Suspend (Windows 95) or Standby(Windows 98) mode and proceed with normal operation.— Hold the Power button in place for 4 or more seconds to initiate power override(powers off the system). Only use this option if you cannot power off yoursystem using Start, Shutdown.
