NEC VT46 User Manual

Also see for VT46: Control commands Specifications Quick connect guide Quick connect guide Release note

NEC VT46 User Manual Manual pdf 14 page image

E-14VIDEO IN S-VIDEO INAUDIO OUTL RAUDIO INL RVIDEO OUTS-VIDEO OUTVCR/ Laser disc playerConnecting Your VCR or Laser Disc PlayerAudio equipmentS-Video cable (not supplied)Video cable (not supplied)Audio cable(not supplied)Use common RCA cables (not provided) to connect your VCR, laserdisc player or document camera to your projector.To make these connections, simply:1. Turn off the power to the projector and VCR, laser disc player ordocument camera.2. Connect one end of your RCA cable to the video output connector onthe back of your VCR or laser disc player, connect the other end tothe Video input on your projector. Use an audio cable (not supplied)to connect the audio from your VCR or laser disc player to your audioequipment (if your VCR or laser disc player has this capability). Becareful to keep your right and left channel connections correct forstereo sound.3. Turn on the projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner's manual for more informa-tion about your equipment's video output requirements.NOTE: An image may not be displayed correctly when a Video or S-Video sourceis played back in fast-forward or fast-rewind via a scan converter.Connecting the Supplied Power CableConnect the supplied power cable to the projector.First connect the supplied power cable's two-pin plug tothe AC IN of the projector, and then connect the otherplug of the supplied power cable in the wall outlet.