|
E–36[Page 4] (Advanced mode)SetupPage1 Page2 Page3 Page4Default Source SelectCommunication SpeedSelect19200bpsControl Panel Key LockClear Lamp Hour MeterClear Filter UsageDefault Source RGBUnlock[Page 3] (Advanced mode)SetupPage1 Page2 Page3 Page4Auto AdjustAuto StartPower ManagementKeystone SaveOn OffOn OffOn OffPower Off Confirmation On OffOn OffWhen “Auto Adjust” is set to “On”, the projector automati-cally determines the best resolution for the current RGB in-put signal to project an image using NEC’s AdvancedAccuBlend Intelligent Pixel Blending Technology.The image can be automatically adjusted for geometry andstability; “Horizontal Position”, “Vertical Position”, “Clock”and “Phase”.On: Automatically adjusts image “HorizontalPosition”, “Vertical Position”, “Clock” and“Phase”.Off: User can adjust the image display functions(“Horizontal Position”, “Vertical Position”,“Clock” and “Phase”) manually.Turns the projector on automatically when the power cableis inserted into an active power outlet. This eliminates theneed to always use the “Power” button on the remote con-trol or projector cabinet.When this option is on and there is no RGB input for fiveminutes or more, the projector will automatically turn itselfoff.NOTE:This feature does not work with Video or S-Videosources.This option determines whether a confirmation dialog forturning off the projector will appear or not.NOTE: When the confirmation message is displayed, youmust be in the Projector mode to operate your projector us-ing the remote control. If not, press the PJ button on theremote control to change your projector to the Projectormode. The button lights to indicate that you are in the Pro-jector mode.This option enables you to save your current keystone set-tings. Saving your change once affects all sources. Thechanges are saved when the projector is off.You can set the projector to default to any one of its inputseach time the projector is turned on.Last: Sets the projector to default to the previousor last active input each time the projectoris turned on.Auto: Searches for an active source in order ofRGB → Video → S-Video and displays thefirst found source.Select: Displays the selected source input everytime the projector is started up. Select aninput from the pull-down menu.This feature sets the baud rate of the PC Control port (MiniDIN 8 Pin).it supports data rates from 4800 to 19200 bps.The default is 19200 bps. Select the appropriate baud ratefor your equipment to be connected.This option turns on or off the Control Panel Key Lock func-tion.NOTE:• When the cabinet buttons are not locked, “Control PanelKey Lock - Unlock” will be displayed. When the cabinetbuttons are locked, “Control Panel Key Lock - Lock”will be displayed.• This Control Panel Key Lock does not affect the remotecontrol and the PC Control functions.SetupPage1 Page2 Page3 Page4Default Source SelectCommunication SpeedSelect19200bpsControl Panel Key LockClear Lamp Hour MeterClear Filter UsageDefault Source RGBUnlock
|
