1337. Maintenance* The projector has a sensor which detects an object in front of the largest mirror or in the light path. If the sensordetects any object, the projector will not turn on. If this happens while the projector is turned on, the image ismuted. In either case the STATUS indicator flashes in red.* The projector has a temperature sensor which detects excessive heat. If the sensor detects heat in the bottomof the mirror or in the light path, the projector will not turn on. If this happens while the projector is turned on, theprojector will turn off (the Standby mode). In either case the STATUS indicator flashes in red. Cleaning the Cabinet1. Turn off the projector before cleaning.2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strongdetergents or solvents such as alcohol or thinner.
