NEC WT615 User Manual

Also see for WT610 Series: Specifications Command guide Command guide Control commands User guide

Contents

NEC WT615 User Manual Manual pdf 63 page image

564. Convenient Features Storing Images Displayed on the Projector on the PC card orUSB memory (Capture)The Capture features allows you to capture an image from a source that is currently being displayed. The image issaved as JPEG in the PC card or USB memory.[Important]• USB memory devices are not available for the Capture function on the WT610.• When saving captured images to a USB memory device on the WT615, be sure to use the USB memory deviceincluded with the WT615. A commercially available USB memory device may be damaged.Also do not use a commercially USB memory card reader. Using a USB memory card reader may causedamage to a flash memory card.NOTE:• Unless a PC card or USB memory is inserted into the PC Card slot or USB port of the projector, the Capture feature is notavailable.• The "Card Error" display means that the free space of the PC card or USB memory is insufficient for saving images. Make morespace available on the card by erasing unwanted images with your PC. The number of images that can be captured depends onthe size of the PC card.• Be sure not to turn off the power or remove the PC card or USB memory while capturing an image. Doing so could cause aloss of the data in the PC card or USB memory or damage to the card itself.• The Capture function is not available for DVI digital signal.Preparations:Insert the PC card into the PC card slot or USB memory into USB port of the projector.Insert the PC card so that the end with the insertion direction arrow on the top goes in first.* Press the eject button to eject the card.1. Project the image you wish to store on the projector.2. Press the FREEZE button on the remote contorol.3. Press the MENU button to display the Capture menu.Capture .................. Captures an image and save it as a JPEG file in a PC card or USB memory.Drive ...................... Select the PC Card or USB memory. You can capture an image and save it to your PC card or USB memory.Exit ........................ Exits the Capture function. Another option to exit the Capture function is to press the MENU or EXIT buttonon the remote control or projector cabinet.4. Press the FREEZE button to resume the motion.NOTE:Captured images with a higher resolution than the projector's native resolution cannot be displayed correctly.• File size of the captured image varies depending on the resolution of an input signal.• An hourglass indicating that an image is being captured appears on the projector's display. Do not eject the PC card or turn offthe projector's power while this icon is displayed. Doing so will damage the PC card data. If the PC card data is damaged, use acomputer to repair the data.• The “Drive” icon will not be displayed on the WT610.