NEC WT615 User Manual

Also see for WT610 Series: Specifications Command guide Command guide Control commands User guide

Contents

NEC WT615 User Manual Manual pdf 15 page image

81. IntroductionTerminal Panel Features1. COMPUTER IN / Component Input Connector(Mini D-Sub 15 Pin)Connect your computer or other analog RGB equip-ment such as IBM compatible or Macintosh comput-ers. Use the supplied RGB/VGA signal cable to con-nect to your computer. This also serves as a compo-nent input connector that allows you to connect a com-ponent video output of component equipment suchas a DVD player. This connector also supports SCARToutput signal. See page 20 for more details.2. COMPUTER AUDIO IN Mini Jack (Stereo Mini)This is where you connect audio output from your com-puter or DVD player. A commercially available audiocable is required.3. DVI-I IN Connector (DVI-I 29 Pin)Connect a computer with a DVI output using a com-mercially available DVI-D cable.This connector can be used to accept digital and ana-log signal output from a computer with a DVI connec-tor.4. DVI-I AUDIO IN Mini Jack (Stereo Mini)This is where you connect the audio output from yourcomputer when connected to the DVI input. A com-mercially available audio cable is required.5. MONITOR OUT Connector (Mini D-Sub 15 Pin)You can use this connector to loop your computerimage to an external monitor from the COMPUTERor the DVI-I input source.The RGB analog signal set on “OUT Terminal” is out-put during Standby mode. See pages 22 and 122.6. AUDIO OUT Mini Jack (Stereo Mini)Connect an additional audio equipment here to listento audio coming from your COMPUTER, DVI-I, VIDEOor S-VIDEO input.7. S-VIDEO IN Connector (Mini DIN 4 Pin)Here is where you connect the S-Video input from anexternal source like a VCR.NOTE: S-Video provides more vivid color and higherresolution than the traditional composite video format.8. VIDEO IN Connector (RCA)Connect a VCR, DVD player, laser disc player, or docu-ment camera here to project video.9. VIDEO AUDIO IN Jacks (RCA)L: This is your left channel audio input for stereosound coming from the VIDEO source.R: This is your right channel audio input for stereosound from the VIDEO source.10. REMOTE IN Jack (Mini Jack)Connect your remote control cable here for wired op-eration.11. PC CONTROL Port (Mini DIN 8 Pin)Use this port to connect your PC or control system tocontrol your projector via a serial cable. This enablesyou to control the projector using serial communica-tion protocol. An optional serial cable (CA03D: 9PinD-Sub to 8 Pin Mini DIN) is required for this port. Youcan also control the projector by using PC ControlUtility 3.0 contained on the supplied User Supportware2 CD-ROM.To do so you must first have PC Control Utility 3.0installed on your PC. If you are writing your own pro-gram, typical PC control codes are on page 147.PC CARDAUDIO INR L/MONOVIDEO IN S-VIDEO IN DVI-I IN COMPUTER IN MONITOR OUTDVI-I COMPUTERAUDIO IN AUDIO OUTPCCONTROLREMOTEIN USB1 561213151437892410 11